联 系 人：栗震宇 经理

地    址：北京市海淀区马甸月季园小区3号楼1508室

邮    编：100088

电    话：86-41-62016660

手    机：13621372923

传    真：86-10-62016660

网    址：http://bjxjfy.b2b.hc360.com/

价    格：面议

供货数量：20台   最小订量：1台

发布日期：2007-05-20

到期日期：2007-06-19

详细说明：

100MHz/2mv/5ns/双踪/CRT读出
体积：27×13×35 cm
主要特征,操作性　
○ 光标测定功能可以迅速而准确地获得测定值　
○ 自动聚焦可以根据亮度自动调整焦距　
○ 时间轴量程可自动设定在最佳扫描时间　
○ 自动触发电平可根据输入信号的振幅，将触发电平可变范围自动设定在最佳范围　
○ CRT读出功能可将通道1/通道2灵敏度，扫描时间，延迟时间，回扫时间状态等显示在荧光屏上丰富多采的功能　
○ 内装有4位频率计数器，可自动测定输入信号（触发信号选择通道）的频率,显示在荧光屏上
○ 具备触发锁定功能，在观测复杂的脉动序列时，即使改变时间量程，也能获得稳定的同步
○ 直流偏移功能可垂直放大显示超过垂直位置可变范围的部分，并可直流取消低频信号　
○ 延迟扫描方便进行放大观测，利用交替扫描功能，可同时显示主扫描和延迟扫描　
○ 全部型号均装备有专用TV同步电路　
○ 质量、可*性、稳定性　
○ 规格设计充足，10℃～35℃条件　
○ 低故障率
主要规格：
示波管:15cm方屏内刻度
加速电压:17kV
垂直轴：
灵敏度及准确度,2mV/div～5V/div±2%　
频率范围,DC～100MHz　（2mV/div：DC～20MHz）　
水平轴：
扫描时间:A（主）扫描：50ns/div～0.5s/div±3%　
　　　　　B（延迟）扫描：50ns/div～50ms/div±3%　
最大扫描时间:5ns/div(×10)　
CRT读出装置：
设定值显示,通道1／通道2灵敏度,A/B扫描速度，延迟时间，脱开同步状态
频率计数,20Hz～100MHz，4位数
光标测定,电压差，时间差，频率　电压差，时间差（同时测定）
外形尺寸：280X130X350mm 重约：5.5kg ,220v/35w
简介：
FEATURE
The Hitachi portable read-out oscilloscope provides
measurement reliability and ease of operation by employing a
microprocessor. The major features are:

(1) Measurement information display
The measurement information including the sweep speed,
the delay time, the UNCAL display, and the voltage
sensitivity of the vertical axis (Cursor Readout type only)
is alphanumerically displayed on the CRT.
Since troublesome setting operation procedures are elimi-
nated, an operator can concentrate on the displayed data
for measurement.

(2) Measurement value display (Cursor Readout type only)
The distance between the two cursors displayed can read
out the following;
△V: Voltage between the reference cursor and the
delta cursor
△T: Time between the reference cursor and the delta
cursor
1/△T: Reciprocal of the time
The displayed data eliminates troublesome and time con-
sunling calculation procedures. Moreover, miscalculation
of the scales is completely avoided.
(3) Automatic time base range setting

At a press of the AUTO button, an optimum time base range is automatically set. (A signal period from 1.6 to 4 cycles approx. is displayed.)
The time base range is automatically changed to a corresponding change in input signal period.

(4) Frequency counter (Cursor Readout type only) The A TRIG signal frequency can be measured.

(5) Trigger lock

Since complicated pulse train waveforms are hard to trigger on, performing the trigger lock function enables sweep independent triggering.
The “sweep time plus holdoff time” is fixed and a stable trigger is obtained at any time range.

(6) Channel input Quad channel input (V-1585, V-1085 on

Besides CH1 and CH2, CH3 and CH4 provided with 0.5 V/ DIV and 0.1 V/DIV range selection capabilities are provided for easy digital signal measurement.

(7) Bandwidth
V-1585, V-1085, V-1565, V-1065A, V-1560, V-1060
DC-100MHz (2mV/div: DC-20MHz)

V-695, V-665A, V-660
DC-60MHz (2mV/div: DC-10MHz)

(8) High sensitivity
High sensitivity of 2 mV/div is provided.

基本配置规格

相关品牌：日立

产品规格：V1065A